Special aerosol cleaner for uncured mounting foam. Used to remove uncured mounting foam from clothing and accessories, to clean the mounting gun immediately after use, both externally and internally. Also for cleaning window frames, window sills, doors and other surfaces freshly smeared with mounting foam. Application temperature from -10°С to + 30°С.
Users manual – to remove foam from clothing and surfaces, use the spray tip attached to the vial. To clean the inside of the foam gun, attach the detergent vial to the gun by holding the gun handle with one hand and screwing the vial upright with the other hand. Turn the foam gun to the working position, with the vial facing up, only after you have made sure that the vial is properly screwed on. Spray the cleaner by pressing the trigger on the foam gun until there is no foam left in the cleaner coming out of the gun. Take special care as the cleaner contains flammable gas. Not suitable for cleaning hardened foam.
| INDEX | UNITS | VALUE |
|---|---|---|
| COLOUR | TRANSPARENT | |
| BASE MATERIAL | ACETONE | |
| STORAGE TEMPERATURE | oC | +5…+25 |
| WORKING ENVIRONMENT TEMPERATURE | oC | -10…+30 |
| VOLUME | ml | 500 |
Store upright in a dry place at a temperature of +5°C to + 25°C. Shelf life – 18 months from the date of manufacture, in accordance with the storage rules. Protect the vials from direct sunlight and heat above 50°C. Quantity in the box – 12 pcs. Quantity on the pallet – 1176 pcs. The weight of one vial is 0.451 kg. Transport temperature – 15°C to + 25°C.
